- Home
- Equipment
Refine by
Arde Barinco Xprt Equipment & Supplies
9 equipment items found
Manufactured by:A.R.D.E. Barinco, Inc. based inCarlstadt, NEW JERSEY (USA)
Wetted parts Type 316 stainless steel. Toothed impeller and toothed liner combination has 6 rows of 6 liner teeth meshing on 3 rows of 7 teeth on helical impeller providing over 6,480 grinding convergences per second at 0.030 inches tolerance. Discharge grid pattern is 7 rows x 7 rows of 1/8' diameter opening (49 holes). Consult factory for alternative grid ...
Manufactured by:A.R.D.E. Barinco, Inc. based inCarlstadt, NEW JERSEY (USA)
33" immersion length shaft with (4) support rods holding 6.5” dia. rotor housing. 5.0" diameter, 5 blade, 24 degree axial flow rotor. 12.5” adjustable baffle plate with control rod and locking handle. All major wetted parts Type 316 stainless steel except Rulon mixing head bearing (FDA accepted). Drive shaft directly coupled to 7.5 HP, 3600 RPM, TEFC Reversible motor for 3/60/230-460 ...
Manufactured by:A.R.D.E. Barinco, Inc. based inCarlstadt, NEW JERSEY (USA)
33' immersion length shaft with (4) support rods holding 5.5” dia. rotor housing. 3.875' diameter, 5 blade, 35 degree axial flow rotor. 8” adjustable baffle plate with control rod and locking ...
Manufactured by:A.R.D.E. Barinco, Inc. based inCarlstadt, NEW JERSEY (USA)
45' immersion length shaft with (4) support rods holding 5.5” dia. rotor housing. 3.875' diameter, 5 blade, 35 degree axial flow rotor. 8.5” adjustable baffle plate with control rod and locking ...
Manufactured by:A.R.D.E. Barinco, Inc. based inCarlstadt, NEW JERSEY (USA)
Wetted parts Type 316 stainless steel. Toothed impeller and liner. '2' diameter conical inlet flange with quick release clamp to 12 liter cone bottom jacketed recirculation tank, suitable for vacuum. 1' diameter sanitary ferrule outlet with quick release clamps to three-way valve to recirculation manifold or discharge. Sanitary ferrule joint gaskets Viton. No. 4 finish minimum on all stainless ...
Manufactured by:A.R.D.E. Barinco, Inc. based inCarlstadt, NEW JERSEY (USA)
Contact Parts: 304 Stainless Steel and Acetal homopolymer (DELRIN). Conical Hopper Volume: 0.33 cubic ...
Manufactured by:A.R.D.E. Barinco, Inc. based inCarlstadt, NEW JERSEY (USA)
Wetted parts Type 316 stainless steel. Toothed impeller and toothed liner. Discharge grid pattern is 18 rows x 17 rows of 1/8" diameter openings (306 holes). Consult factory for alternative grid ...
Manufactured by:A.R.D.E. Barinco, Inc. based inCarlstadt, NEW JERSEY (USA)
Wetted parts Type 316 stainless steel. Toothed impeller and toothed liner. Discharge grid pattern is 18 rows x 17 rows of 1/8” diameter openings (306 holes). Consult factory for alternative grid ...
Manufactured by:A.R.D.E. Barinco, Inc. based inCarlstadt, NEW JERSEY (USA)
60" immersion length shaft with (4) support rods holding 5.5” dia. rotor housing. 3.875" diameter, 5 blade, 35 degree axial flow rotor. 8” adjustable baffle plate with control rod and locking ...